how to use rhinestone transfer?

comments (0) January 12th, 2015     

Pin It

Lilyfoksy Lilyfoksy, member
Love it! 1 user recommends

*REMOVE THE SPARES STONES FROM YOUR DESIGN

*ALWAYS IRON ON A HARD, FLAT SURFACE

 1.) Remove backing paper and check your design to make sure that the rhinestones have not moved during transit, Use tweezers to reposition rhinestones if need be, and remove the spare rhinestones

2.) Position the design onto your chosen garment, 

The sticky-side of the transfer paper facing down onto the fabric. 

If you need to reposition,  Simply lift and reposition.

3.) Set the iron to the heat setting that is most suitable for your garments material. NO STEAM! 

Most common setting is high. 

When using a commercial heat press you will need to read 320 degree's.

4.) Applying medium to heavy pressure & press the iron/heatpress onto the design for approx 20 seconds.

(Once you have covered all your design)

5.) Allow to cool until warm and then slowly peel away the transparent sticky transfer tape. 

JOB DONE!

(Your design will stay in place if the heat was applied properly.

If any rhinestones dont stick, lay the design back down and repeat from step 4)

posted in: fabric, white, red, pink, dress, embroidery, yellow, orange, silver-metallic, purple, footwear, turquoise, violet, navy, olive, marigold

Comments (0)

You must be logged in to post comments. Click here to login.