How to Make Perfect-Fitting Pajama Bottoms
comments (18) November 17th, 2008Step 4: Join the short end of one piece of contrast fabric to another, using a 1/2-inch seam allowance. Press open the seams, and pin and sew the strip to the hem, right sides facing and using a 1/2-inch seam allowance. Repeat for the other leg.
![]() |
Adding a contrast fabric to the hem of your PJs will totally sass them up. |
Step 5: To join the two halves of the pajama bottoms, with right sides facing, pin the pieces together from the waist to the crotch and sew, backstitching at the beginning and end and pressing your seams open. Repeat for the other waist-to-crotch seam.
![]() |
Pin one edge from waist to crotch and sew. |
Step 6: With right sides facing, pin the inseam of each leg and sew from the bottom hem up to the crotch, pressing open the seams when done.
Step 7: You should have raw edges at the hem and at the waist. Fold over 1/4 inch at the hem and press. Fold over another 1/2 inch, pin, and hem your pajama bottoms with a 1/2-inch inseam.
Step 8: Now it’s time to rock the waistband. Fold over and press 1/4 inch at the top edge of your waistband. Now fold over 1-1/2 inches and pin in place. Starting at the middle of the back, sew down the waistband with a 1/8-inch seam allowance (you want to stitch down the 1/4 inch of fabric you pressed down), stopping 2 inches from the end (you want to leave a hole to feed elastic through). Measure the waistband (this time without pulling the elastic) of your original pajama bottoms. Cut out a corresponding length of 1-1/4-inch nonroll, sew-through elastic. Poke a large safety pin through one end of the elastic and feed it through the tunnel you just created. When it comes out the other side, remove the safety pin and sew the two ends of the elastic to each other, backstitching at the beginning and end. Sew up the 2-inch opening of the waistband so that the elastic is completely encased and hidden.
![]() |
With a safety pin as your lead, thread the elastic through the tunnel you created for the waistband. |
![]() |
When you've threaded the elastic, sew the two ends to each other and sew the tunnel shut. |
After you make this project, show off your work to other members!
Post your project in the gallery
Dare to Make It! Holiday
We dare you to make your own gifts and decorations this holiday season!
Find inspiration and exciting how-to projects to get you through the holiday season in DIY style.
















Comments (18)
This looks ok as an easy beginner's project, but honestly, I don't know about anyone else, but I'M not the same from front to back when it comes to pants!! I guess it would take a lot of trial and error to have the fit turn out right. The construction itself is easy enough. Using an existing garment thats fits well to copy from is always a good idea.
Posted: 11:56 am on November 26th
Posted: 6:35 am on February 24th
Posted: 10:27 am on February 20th
Posted: 5:18 am on January 1st
Posted: 8:23 pm on December 31st
BTW LOVE the pajamas...I just made some pj bottoms for my toddler out of fleece!
Posted: 8:55 pm on January 17th
They were not perfect as it was my first attempt but my 8 year old loves them. I used fleece monkey fabric with hot pink satin as the panels at the bottom.
Thank you for posting this pattern!
Posted: 11:39 pm on April 23rd
Thanks much!
Posted: 3:50 pm on April 4th
Posted: 6:37 am on January 7th
Posted: 1:01 pm on November 22nd
Posted: 5:49 pm on November 18th
Posted: 5:39 pm on November 18th
The jammie bottoms are quite cute. I do copy patterns all the time and make my own adjustments for better fit,etc. I love my Serger for quick projects like this one. Good tutorial.
Posted: 1:29 pm on November 18th
With a little knowledge and creativity, you can make anything from old comfy clothes. I do it all the time. Then use the clothes in a quilt.
Posted: 9:12 am on November 18th
Posted: 8:59 pm on November 17th
This ought to work on kid's P.J.'s too. Thanks!
Posted: 7:10 pm on November 17th
Posted: 6:39 pm on November 17th
Posted: 1:08 pm on November 17th