Make Beach Glass Earringscomments (14) June 29th, 2012
On the opposite end of the glass, drill another hole so you wind up with a hole at the top and bottom of the glass; this piece serves as the top dangle of an earring. On a second piece of glass, only drill one hole; this piece will serve as the bottom dangle.
Step 2: With your chain-nose pliers, gently twist open a 7mm jump ring. Slip the one-holed piece of beach glass on the ring and twist the ring until the ends are snugly joined. Now, add a jump ring to one hole in the other piece of beach glass. Join the two pieces of glass by slipping a 5mm jump ring through the jump ring on each piece.
Step 3: Let's finish this gorgeous summery earring. Using chain-nose pliers, twist open another 7mm jump ring and slip it through the other hole on the two-holed (top) piece of glass. Slip an ear wire onto the jump ring and close.
Step 4: Repeat steps 1–3 for the other earring. If you like, you can add a dab of clear nail polish at the join of all your jump rings for added security.
After you make this project, show off your work to other members!
Post your project in the gallery