Transform Your T-Shirt into a Tunic

comments (17) January 13th, 2010     

Pin It

CalPatch cal patch, contributor
Love it! 198 users recommend
With a few easy steps restyle an old T-shirt into a standout tunic.
Find an old T-shirt in your closet or at a thrift store.
Photo: Sloan Howard
1 | 2 | 3 | 4 | 5   All

If you’ve been to your local thrift store lately, you’ve probably noticed that the world has enough tees in it to clothe us all for the rest of eternity — that is, if you want to run around looking like a sack of potatoes emblazoned with a corporate logo! But take an old T-shirt, apply a little sewing know-how, and you’ve got a great way to expand your wardrobe.

I’ll show you how to transform a tired tee into a sweet tunic to welcome spring. This is a simple project for the moderately experienced sewer; you need to be comfortable with machine sewing, fitting, and making some renegade alterations. The top shown here includes a cute insert with buttons at the front and a keyhole cutout at the back, but you can leave them out. That’s the best thing about restyling: you’re the designer.

What You'll Need:
• Disappearing-ink marker or tailor’s chalk
• Pins
• Ruler or hem gauge
• Scissors
• Sewing machine
• T-shirt, very oversize
• Tape measure
• Thread to match


Measure Carefully, and cut up your tee
Break out the trusty tape measure. Then take that ugly tee apart, so you can sew it into something fabulous.

1. Take your measurements.
Measure your bust and bicep circumferences as well as the distance between your shoulder points.

2. Enlarge and cut the neck.
Fold the shirt in half along the center front (CF) so one sleeve is stacked on top of the other. Match the neckline, shoulders, and side seams on both layers. Draw the enlarged neckline with chalk, and cut on the line. On the top shown, the neckline was lowered about 2 inches, and made 1 inch wider on each side.


Create an insert at center front.


3. Create an insert at the center front.
Draw a 4-inch-wide (2-inch-wide when folded) by 5-inch-long insert at the CF neckline. Cut it out, making a tiny notch at CF on the top and bottom. Then set it aside; you’ll need it again soon.


Create an insert at center front.

4. Measure and cut the insert opening. Draw a 1- to 2-inch line evenly around the entire insert edge on the shirt. The distance from the insert opening determines the amount of gathering you’ll have. Cut along this line, making a tiny notch at CF on the fold at the bottom of the seam.


Measure and cut the insert opening.


5. Make a keyhole opening in back.
On the back of the shirt, mark and cut a 2-inch-wide by 3-inch-long “U” from the neck for the keyhole opening.


Make a keyhole opening in back.

Sew it together in a new way
Now that you have all the pieces measured and cut out, it’s time to piece them back together.

1. Gather the insert opening. Sew two rows of gathering stitches 1⁄8 inch and 1⁄4 inch from the edge around the insert opening on the shirt piece. Then pull the gathering threads until the enlarged neck is the right size for the insert.


Gather the insert opening.


2. Pin and sew the insert.
With right sides together, pin the insert to the gathered shirt, matching the notches at CF. Then sew a 1⁄4-inch seam allowance. Turn the shirt right-side out, and edgestitch the insert close to the seamline.


Pin and sew the insert.


3. Sew the keyhole opening.
To finish the edge of your keyhole opening, turn it under 1⁄4 inch, and zigzag stitch it.


Sew the keyhole opening.


4. Try on the tunic. First, check the length. To shorten the top, cut and hem. Then check the armhole seam placement, and note the sleeve length.



Alter the sleeves
Depending on the tee, this part can be a little tricky. If you’re happy with the positions of the armhole seams (ideally somewhere near your shoulders), you can use Method A. If the seams are way down by your elbows, you might want to do a complete overhaul of the armhole and sleeve (Method B).

Method A - refit the sleeve. From the folded center of the sleeve, measure half the bicep circumference plus 1 inch. Mark a new underarm seamline up to the armhole. Then adjust and blend into the side seam.


Method A


Method B - create a new sleeve.
Cut the sleeves off the shirt. Using a tee that fits and your shoulder width as a guide, draw a new armhole and side seam on the shirt. Then, draw new sleeve shapes on the sleeve pieces. Cut them, and attach the new sleeves.


Method B


Tip: Tunic too cute? For an edgier look, try contrasting colors for the insert, neck binding, and cuffs. You could also decorate the insert with embroidery, appliqué, or trips instead of buttons.


Part Four: Add designer details
Here's where you can get creative. Use any scraps that catch your fancy for a tunic that reflects our personal style.

1. Make the cuff ruffles. From your T-shirt scraps, cut two strips to the desired ruffle width plus a 1⁄2-inch seam allowance. The length should be one and a quarter to one and a half times the full circumference of the sleeve edge. With right sides together, join the short ends of each strip to form a ring; then sew two rows of gathering stitches around the edge. Gather to fit the sleeve, and sew the ruffle to the sleeve. Press the seam allowances toward the sleeve, and topstitch around the sleeve to anchor the seam allowance.


Make the cuff ruffles.


2. Bind the neckline. Find a long, skinny scrap at least 11⁄2 inch wide and long enough to bind the neck. Be sure to leave the tails long enough to tie at the back. Find the center of the strip by folding it in half lengthwise. Pin the strip face down to the CF notch on the wrong side of the T-shirt insert. Continue pinning all the way around the neckline. Then, stitch a 1⁄4-inch seam allowance around the neckline.


Bind the neckline.


3. Finish the neckline. Now fold the binding over the raw edge of the neckline. Tuck the edge under, and pin, continuing out to the ends of the ties. Edgestitch around the neck from the end of one tie to the end of the opposite tie.


Finish the neckline.


4. Sew buttons onto the insert. Hand-stitch a few buttons to the insert at CF. No one will believe that your tunic came from an oversize T-shirt; in fact, I recommend you carry a “before” photo around as proof.


Sew buttons onto the insert.


Before and After


excerpted from CraftStylish Restyle, p. 19

1 | 2 | 3 | 4 | 5   All
posted in: embroidery, sewstylish feature, sewstylish technique, t-shirt

Comments (17)

belleeven writes: What a lovely design! It may be a while before I can find a T that is **THAT** big on me, but when I do, I'll give it a go. :)
Posted: 5:27 am on September 6th
chibimaddy writes: I hope to be able to make one for me. Since I'm already a big girl, I may have to buy 2 over-sized shirts, but I've not seen a design this cute in any of the stores, so learning to sew this pattern would be worth it!.
Posted: 9:51 pm on March 11th
Apachewmn writes: This looks great! I am not a clothes sewer, I usually just make crafts and this looks like it would be too daunting of a task for me??? although I might give it a try.

Thanks again for the tutorial.
Posted: 2:36 pm on July 14th
earthwings9 writes: I like it and think its cute. They are selling something like them at Kohls. Its only a T shirt so not much expense involved if you mess it up or don't like it lol.
Posted: 6:06 pm on May 12th
wdetc2914 writes: Looks really cute. I would love to see it on someone modeling it.
Posted: 4:53 pm on May 12th
paintedwithheart writes: Going to give it a try, really hope it turns out as cute! Thanks for posting!
Posted: 4:41 pm on May 12th
PearlieGirl1 writes: So creative....makes me want to dust off my sewing machine and give it a go!
Posted: 9:43 am on April 20th
doodah_mama writes: Thank you for the tutorial! I just love reconstructing garments...it is so satisfying! Did have some trouble with this one, but I'm sure it was my error; the bustline included way too much of the sleeve! Very tight across the front with lots of fabric in the back! I will certainly try again, though.
Posted: 8:41 am on April 9th
quilties writes: I really like this, thank you for sharing! I'll surely try it!

I would like to see the finished product on you...what do you think?

Posted: 12:02 am on February 4th
adornable writes: I am soooo impressed! I always thought that all those jersey tee-shirts could be sewn into something stylish and fun. Thanks for this tutorial.
Posted: 2:00 pm on January 31st
birdlingsflat writes: Thanks so much. I've been saving big t-shirts until I could figure out a pattern & here it is! I love it.
Posted: 1:27 pm on January 14th
Idna writes: Great idea!!! I'll recycle the too loose tees of my brother :p thanks! it seems easy!
Posted: 7:58 am on January 14th
Bigpurpledragon writes: I really love this. Can't wait to try it! Thanks for an easy tutorial too. x
Posted: 5:24 am on January 14th
sunFlowerseeds writes: This Is a Great Way To Make This I Wear These A Lot. I just Hope I Can Do It.There Not Cheap Either I Have Had My Newachine For 5 Months And Have Never Used It Im Having Next Week As Soon As I Heal Up Im Going To Try This I Like the Way It Show The Details.Just Wanted To Say It Turned Out Great.
I Will Be Checking This Site Out ALot Happy sewing Everyone!
Posted: 9:23 pm on January 13th
brendagail writes: This is really clever, I agree. It seems like a lot of redesigning, though..almost as much trouble as making one from scratch. If I buy a man's larger size t-shirt, I am wondering if I could just lay a current pattern on top and recut based on the pattern? Somehow I am more comfortable with a pattern to rely on than with entirely resizing armholes, necks, etc. But, hey -- that salvage store t-shirt is still much cheaper than buying the fabric off the bolt!


Posted: 8:08 pm on January 13th
hellopf writes: Very cute makeover but didn't the color of the t-shirt change somewhere in the process? I like the darker green much better! Thanks for sharing.
Posted: 7:37 pm on January 13th
Terry6 writes: This is the most clever and cutest shirt I have EVER seen!!! I have to get some oversize tees and try this for my daughters. The creativity of the designer is amazing! Thank you for yet another fantastic idea.
Posted: 6:56 pm on January 13th
You must be logged in to post comments. Log in.