How to Quilt a Textured Vest

comments (5) October 26th, 2011     

Pin It

MaryRay Mary Ray, contributor
Love it! 14 users recommend
No pattern, no seams, and a raw-edge bias binding make this vest a  quick-to-sew slam dunk.
Three measurements and a little math supply the entire pattern youll need.
How to calculate for shrinkage: Measure your test swatch before and after you shrink it; use the difference to figure out the size to cut your vest pieces.
No pattern, no seams, and a raw-edge bias binding make this vest a  quick-to-sew slam dunk.

No pattern, no seams, and a raw-edge bias binding make this vest a quick-to-sew slam dunk.

Photo: Sloan Howard
< 1 | 2 | 3 | 4 View all

4. Make it into a vest. Align the fronts to the back at the shoulder edges and hem edges. Measure in 4 inches from the shoulder tips, then tack each shoulder join (alternatively, join the pieces with a button).  At each side edge, mark and tack gauze strips of your desired length for the ties; place them at or near waist level.

5. Soak and dry. Place the vest in cool water and thoroughly soak it. Gently squeeze out any excess water and toss it in the dryer on a gentle or “delicates” setting until the fabric shrinks. Don’t be tempted to press when it’s done—the scrunchiness will disappear.

Excerpted from Quick Stuff to Sew, Vol. 5

< 1 | 2 | 3 | 4 View all
posted in: sewstylish technique

Comments (5)

Ranchera writes: I have been working with shetland wool, while spinning the yarn I didn't know what to do with it. Now I do, but first will felt the fabric (all colours) then cut it out. Great idea!! Thank you for sharing.
Posted: 3:43 pm on November 4th
Ga0724 writes: I really think you would need to use three layers of fabric for it to quilt correctly as opposed to YarnUiPhoneApp's suggestion of using two, particularly if it is a gauze-cotton or wool. It does lend itself to all kinds of embellishment techniques and I am looking forward to trying.
Posted: 2:53 pm on November 4th
sandyfromtexas writes: I would definitely quilt and wash the fabric before cutting the pieces. All that math makes my head spin. Plan a big enough piece to cut the vest in one pattern piece. You could also add ribbons, threads, or quilt scraps as you quilt to make it more interesting.
Posted: 1:07 pm on November 4th
Maraha writes: This is clever in so many ways! Will make this vest! Already excited to give this fabric 'treatment' a try for other projects. I'm so happy there are such bright folks out there who are willing to share their ideas! Thanks!
Posted: 1:06 pm on November 4th
YarnUiPhoneApp writes: Love, love, love this idea! Personally, I'd do two things differently:

-pre-shrink both fabrics first.

-use KK200 to temporarily 'glue' the two fabrics together. This will help while you're quilting.

- Sew the two fabrics as one before cutting out the pattern pieces, toss in the wash, dry, then cut to your heart's content. You're more to get an accurate fit this way.

Finally, you could make different types of vests this way...Wool would work for fall/winter, cotton, linens for summer. Great wardrobe enhancer!

(As an aside, you could knit fabric with natural yarns and do the same thing, but that's just too much work in my mind).
Posted: 10:18 am on October 27th
You must be logged in to post comments. Click here to login.