Sew a Sweet Cummerbund Beltcomments (0) January 26th, 2012
Sewing celebrity and instructor Gretchen Hirsch was one of the artists who worked with the pattern. Gretchen's take had a wonderful retro vibe - and a cute cummerbund belt we promised to tell you how to make here on SewStylish.com
The Belt Pattern
The cummerbund is simply rectangles.
Cut four belt side pieces, each 3 inches wide by 10 inches long. You may cut the belt pieces on-grain or cross grain.
Use a belt side piece to cut two fusible interfacing pieces.
Cut one belt front, 14 inches wide by 13 inches long.
You will also need two pairs of wide hooks and bars, the type sold for waistbands.
Note: The pieces described here will make a belt that fits a 28-inch to 30-inch waist. To make a larger belt, increase the length of the belt side/back pieces by 1/2 inch for every inch you need to add to the belt.
Sew the Belt Sides
1. Fuse interfacing to the wrong side of two belt side/back pieces.
2. Pair an interfaced belt side with an uninterfaced belt side, wrong sides together. Align all edges. Sew along one long edge with a 1/4 inch seam allowance. Pivot at the corner, and sew along the short end and the other long side. Leave one short end unsewn. Repeat with the other belt side pieces.
3. Clip the seam allowances at the sewn corners. Turn the belt sides, using a point turner (or a chopstick or big knitting needle) to get sharp turned points. Press the belt sides flat. Turn in a 1/2-inch seam allowance on the unsewn short ends.